4.9
Restore Default
Use this menu to reset all tester settings to their factory defaults. Using this option will not
delete stored tests.
Use Arrow Keys to navigate to "Restore Defaults" menu and press Enter.
1.
2. Use the soft key
3. Use the soft key
4.10
Clear Memory
Use this menu to clear all records from the tester memory at one time.
CAUTION!
When using the "Clear Memory" menu, the records cannot be restored. This will permanently delete
all stored tests.
1.
Use Arrow Keys to navigate to Clear Memory menu and press Enter.
2. Use the soft key
3. Use the soft key
LanTEK III
User Manual
Fig. 18 Restore Defaults
to accept default settings.
to exit the screen without making changes.
Fig. 19 Clear Memory
to clear the memory of the Cable Certifier.
to exit the screen without making changes.
161809 Iss 2
Page24