4. Use Arrow Keys to navigate to Custom Name/NVP and confirm with Enter.
5. Assign a name for the newly created custom cable The soft key
appears.
6. Use Alphanumeric Keys to enter one or several NVP values, if required.
soft key
7. Use
custom cable.
6.18.2
Select Custom Cable Type
The custom cable type can be edited at any time or selected as current cable type.
1.
Open "Cable Type" on start screen.
2. Use Arrow Keys to navigate to Custom Cable and confirm with Enter.
3. Use Arrow Keys to navigate to desired custom cable type and confirm with
Enter.
LanTEK III
User Manual
Fig. 88 Menu Selection Test Standards
Fig. 89 Custom Name/NVP
to accept changes and return to screen to create a
161809 Iss 2
Page69