Autotest Pref
Enable 606A
Enable Wiremap On
Failed Autotest.
5.2
Select Job Folder
The name of the current job folder is shown in the TFT display on the ready screen. To save
the Autotest it is possible to keep this job folder, enable another existing job folder, or
create a new job folder.
5.2.1
Enable Existing Job Folder
1.
Use Arrow keys to navigate to "File" and press Enter to open the job list.
2. Use Arrow Keys to navigate to the desired job folder. The display is highlighted blue.
LanTEK III
User Manual
Description
Enable labelling standard TIA/EIA 606-A for telecommunication
infrastructure as cable ID.
NOTE:
If labelling standard TIA/EIA 606-A is enabled; the selected cable
name (simple cable ID/default cable ID) is not applied.
In case of failed Autotest, it determines whether another fault
analysis will automatically be performed.
Fig. 22 File
161809 Iss 2
Page28