IDEAL Networks LanTEK III Manual page 35

Double Cable ID (2 cable names, start/end)
Use Alphanumeric Keys to enter a Cable Name for the Cable From/Cable To of
1.
test portion.
2. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an
arbitrary value.
3. Use Alphanumeric Keys to enter an arbitrary value for Start and End. Meter is
reset after reaching final value.
4. Make corrections to entries by using the soft keys
position),
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
5. Use symbol
Auto Increment of a character.
6. Use soft keys
and Cable To.
7. Use Alphanumeric Keys to enter a Cable Name for the Cable From/Cable To of
test portion.
8. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an
arbitrary value.
9. Use Alphanumeric Keys to enter an arbitrary value for Start and End. Meter is
reset after reaching final value.
10. Make corrections to entries by using the soft keys
position),
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
11. Use symbol
Auto Increment of a character.
12. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
LanTEK III
User Manual
(delete characters to the left of cursor),
to lock a position into entered value. Use symbol
Fig. 33 Double Cable ID
and
(delete characters to the left of cursor),
to lock a position into entered value. Use symbol
(delete at cursor
to switch between the views Cable From
(delete at cursor
/
to enable
/
to enable
161809 Iss 2
Page34