Table of Contents
Advertisement
The name used last will appear:
•
Single Cable ID (1 name is assigned to each cable).
or
•
Double Cable ID (2 names are assigned to each cable, one for the start and one
for the end of the cable).
•
Increment... when pressing Enter, the current value of the test meter, shown in
view below, is incremented by one position.
•
Set... opens menu for cable name.
•
Select... switches between Single Cable ID and Double Cable ID.
5.3.1
Simple Cable ID
1.
Use Arrow keys to navigate in "Cable ID" view to option Set... and press Enter.
Single Cable ID (1 cable name)
2. Use Alphanumeric Keys to enter a Cable Name for the test portion.
3. Use Alphanumeric Keys to reset the Current Value of the test meter, or enter an
arbitrary value.
4. Make corrections to entries by using the soft keys
position),
(insert alphanumeric characters at cursor position / overwrite highlighted entry).
LanTEK III
User Manual
Fig. 28 Cable ID
Fig. 29 Cable ID
(delete characters to the left of cursor),
(delete at cursor
/
161809 Iss 2
Page31
Hide quick links:
Advertisement
Table of Contents
