5.12
Autotest Results and Graphs
The Autotest results can be displayed as table or graph.
1.
Open "File" on start screen.
2. Use Arrow Keys to navigate to the desired job folder. The display is highlighted
yellow.
3. Use Arrow Keys to navigate to desired single test. The display is highlighted
yellow.
4. Press Enter to display overview of single tests.
5. Press Enter again to open test series of single test.
6. Use Arrow Keys to navigate to desired test series and press Enter to display
result table.
LanTEK III
User Manual
Fig. 65 Single test overview
Fig. 66 Test series
Fig. 67 Result Table
161809 Iss 2
Page55