Setup For Channel Link Test; Setup For Other Test Methods - IDEAL Networks LanTEK III Manual

3.1.2

Setup for Channel Link Test

A channel link includes all components of a cabling system. It consists of up to 90 meters
horizontal cabling, including patch cords, jumpers, and test adapters at each cable end. The
channel link shown above serves to certify the network installation, including the horizontal
cable line and patch cord.
Channel link testing requires different test Adapters depending on the link under test:
R161056 LanTEK® GG45-Adapter
R161054 LanTEK® TERA-Adapter
R161055 LanTEK® EC7-Adapter
R161053 LanTEK® Cat. 6A-Adapter for RJ-45
R161052 LanTEK® Cat. 6-Adapter for RJ-45
NOTE:
3.1.3

Setup for other Test Methods

Depending on the testing requirements other than permanent link and channel, LanTEKIII
offers various testing configurations:
• Coaxial testing
R161057 LanTEK® Coax-Kit
• Testing of End-to-End (E2E) , Device- or Direct Attach Links:
R160050 LanTEK® Industrial Ethernet Kit
& R161053 & LanTEK® Cat. 6A-Adapter for RJ-45
(both Adapters are required)
NOTE:
LanTEK III
User Manual
Please visit www.idealnetworks.net for an
up to date full list of test Adapters.
Please visit www.idealnetworks.net for an
up to date full list of test Adapters.
161809 Iss 2
Page18