Custom Cable Parameters - IDEAL Networks LanTEK III Manual

6.18.3

Custom Cable Parameters

Parameters
Frequency range
Connector Pinout
Test Limits
Link models
Select Autotests
Custom Name/NVP
LanTEK III
User Manual
Fig. 90 Custom Cable Parameters
Description
Use this menu to set the lowest and highest frequency for certification and
evaluation of cable performance.
Use this screen to determine the configuration of the contact pins of the plug.
Note:
Tests for NEXT, loss, capacitance, DC-resistance and impedance cannot be
performed on wire pairs that have not been selected.
Use this screen to adjust the pass/fail limits for the Autotest to your
requirements.
The custom limits for NEXT and loss are specified as constant limit or according
to the link models. The frequency limits depend on LanTEK
type.
Not all cable lines require the complete Autotest test series. Use this option to
select the individual Autotests to be performed.
Use Alphanumeric Keys to enter a custom name or edit the NVP value.
LanTEK II Cable Tester can save up to 10 custom cable types.
®
II model and link
®
161809 Iss 2
Page70