Set Autotest Pref - IDEAL Networks LanTEK III Manual

Overall Passed/Failed Result
The overall result of Autotest is displayed after test series is completed.
Symbol Overall Autotest Result
The overall Autotest receives a passing grade if all single tests have been passed
or passed*.
The overall Autotest receives a failing grade if at least one single test has failed or
failed*.
5.1

Set Autotest Pref

1. Open "Preferences" on start screen.
2. In "Preferences" open Autotest Pref.
3. Use Arrow Keys to navigate to the according Autotest Pref. Use soft key
to enable or disable the selected Autotest Pref. Enabled Autotest Pref are indicated
by green boxes.
4. Press Enter to save the information entered. Escape allows you to exit the menu
without making changes.
Autotest Pref
Simple cable ID
Stop on Fail
Autosave
Auto Increment
This will permanently
delete the Tests / Jobs
from the tester
LanTEK III
User Manual
Fig. 21 Autotest Pref
Description
Assign name to cable line and set/reset meter reading of tests. The
name can be assigned as simple cable ID or double cable ID (Cable
From/Cable To).
NOTE:
If Simple Cable ID is not enabled, the cable name assigned will be
the default cable ID. In addition to cable name and test meter, an
initial value and a final value can be set, and the way of counting
can be specified.
The Autotest is stopped after the first failed test.
The LanTEK III Cable Tester automatically names and saves all
®
results of passed Autotests in the current job folder.
The test meter for the cable ID is automatically advanced after each
Autotest.
Enables confirmation prompt prior to deleting data.
161809 Iss 2
Page27