Preparations for use
3.2 Inspections when the equipment is received
3.2.2
Checking shock and tilt indicators
The purpose of shock and tilt indicators
The unit is equipped with shock and tilt indicators to monitor for damage during transit. It is
essential that you check the shock and tilt indicators before commissioning the unit.
Tripped shock and tilt indicators
Safe operation of the device is not guaranteed if the shock or tilt indicator has tripped
(responded)
This can result in death, serious injury or material damage.
● If one of the indicators has tripped, do not perform any commissioning.
● Inform the Technical Support. Only specialist Siemens technicians can recommend
See also
Siemens Industry Online Support (Page 139)
46
WARNING
appropriate measures.
Applications for Cabinet Modules, liquid cooled
Operating Instructions, 04/2015, A5E35974555A