Siemens SINAMICS S120 Operating Instructions Manual page 52

Preparations for use
3.3 Transport
Observe the following points for safe transport:
● When using a crane to transport the equipment, keep to the permissible lifting capacity.
Carefully observe the center of gravity.
● If the cabinet center of gravity is off-center, use suitable and undamaged suspension
equipment, e.g. a cross beam. The lifting beam reduces the pressure on the device and
prevents damage.
● If the cabinet has eye hooks, use them. In such cases, do not use any lifting rods.
Transport using the top-mounted eye bolts
Figure 3-4
Attach the crane to the top-mounted lifting eyebolts and then lift the cabinet.
Avoid displacing the center of gravity or distorting the cabinet. When suspended, the cabinet
must be parallel to the ground.
52
Diagram: crane transportation
Applications for Cabinet Modules, liquid cooled
Operating Instructions, 04/2015, A5E35974555A