Unpacking The Cabinets; Removing The Packaging; Removing Load Securing Devices - Siemens SINAMICS S120 Operating Instructions Manual

Preparations for use

3.4 Unpacking the cabinets

3.4 Unpacking the cabinets
3.4.1

Removing the packaging

NOTICE
Incorrect storage of unpacked devices
Proper packaging ensures that the equipment is protected. Unpackaged equipment may be
damaged if it is stored or out of service over a long period.
Refer to the storage information under "Storage" and in the section "Technical specifications".
Remove the packaging immediately prior to installation.
The devices are packaged by the manufacturers in accordance with the order and the climatic
conditions of the transport route in the receiving country.
In order not to damage open mounting parts (e.g. pipes and busbars), take the following
measures when removing the foil and the load securing devices:
● Remove the foil and load securing devices carefully.
● Remove the packaging immediately prior to installation. Protect the cabinets against dust
until they have been commissioned. To do this, cover the ventilation openings and keep
the doors closed.
● Do not remove the safety instructions and center of gravity specifications from the cabinet.
3.4.2

Removing load securing devices

Fixing materials can come under tensile stress
If fixing materials are released suddenly during opening and people get in the way, this could
result in bodily injury or death.
Release the retaining straps before opening. Stay out of the way of the impact direction of
the retaining straps.
NOTICE
Improper removal of the load securing devices
The load securing device protects the cabinet from any damage. If you remove the load
securing device improperly, the cabinet may sustain damage.
Correctly remove the load securing device.
56
WARNING
Applications for Cabinet Modules, liquid cooled
Operating Instructions, 04/2015, A5E35974555A