Transporting Transportation Units Packed In Boxes - Siemens SINAMICS S120 Operating Instructions Manual

Preparations for use
3.3 Transport
3.3.6

Transporting transportation units packed in boxes

Transportation with the fork-lift truck
When the transport units are transported with a fork-lift truck, the force is absorbed through
the transport pallet. Observe the guidelines described in the section "Transport with a fork-lift
truck".
Transportation with the crane
Observe the guidelines described in the section "Transport with a crane". To protect the boxes
against pressure, use sufficiently long rope and a spreader beam. Please proceed as follows:
1. Attach the rope/cable to the pallet as shown in the following diagram.
2. Attach the rope/cable to the spreader beam
3. Pay attention to the center of gravity imprinted on the box
the ropes
4. Carefully raise the transportation unit.
Figure 3-6
See also
Transporting using a crane (Page 51)
Transport with a fork-lift truck (Page 51)
54
③
.
①
Spreader beam
②
Center of gravity
③
Imprinted position of the rope
Transporting a transportation unit (still in packaging) with a crane
①
and the crane hook.
②
and the imprinted position of
Applications for Cabinet Modules, liquid cooled
Operating Instructions, 04/2015, A5E35974555A