General Instructions On Installation - Festo CPV..-DI01 series Electronic Manual

1. Installation
1.1

General instructions on installation

Festo P.BE−CP−DI01−EN en 0503d
Information on using the CPV Direct in explosion−protected
areas can be found in section 1.8.
Warning
Before carrying out installation and maintenance work,
switch off the following:
the compressed air supply
the operating voltage for the internal logic
the load voltage for the valves.
You can thereby avoid:
uncontrolled movements of loose tubing
unexpected movements of the connected actuators
non−defined switching states of the electronic compo
nents.
Caution
The CPV valve terminal with field bus direct connection
(CPV Direct) contains electrostatically sensitive compo
nents.
Do not therefore touch any contacts.
Observe the regulations for handling electrostatically
sensitive components.
You will then prevent the electronics from being damaged.
1−3