Festo CPV..-DI01 series Electronic Manual page 52

1. Installation
1−38
You can connect the following to the CP extension connection:
CP input module with 16 inputs
CP output module with 8 outputs
CPV valve terminals
CPA valve terminals (max. 8 double−solenoid or 16 single−
solenoid valve plates in conjunction with a CPV Direct)
Please note
The CPV Direct can be extended by maximum:
one CP input module
one CP valve terminal or one CP output module.
Caution
The maximum cable length between the CPV Direct and the
last CP module must not exceed 10 m.
The CP connecting cables must have special electrical
characteristics. Always use, therefore, Festo CP connecting
cables.
You can obtain ready−to−use CP connecting cables from Festo.
These are available in various lengths and types. You will find
a summary in Appendix A.
Seal unused CP connections of your CP system with the
relevant seal provided. You will then comply with protection
class IP65.
The following table gives an overview of the possible
extensions:
Festo P.BE−CP−DI01−EN en 0503d