Designated Use - Festo CPV..-DI01 series Electronic Manual

Contents and general instructions

Designated use

Festo P.BE−CP−DI01−EN en 0503d
The CPV valve terminal type CPV−DI01 with field bus direct
connection (CPV direct) described in this documentation is
designed exclusively for use as a slave on the following field
buses:
PROFIBUS−DP
Festo field bus
ABB CS31
Moeller SUCOnet K
The valve terminal may only be used as follows:
as specified in industrial applications
without any modifications by the user Only the conver
sions or modifications described in the documentation
supplied with the product are permitted
in faultless technical condition.
The maximum values specified for pressures, temperatures,
electrical data, torques etc. must be observed.
If additional commercially−available components such as sen
sors and actuators are connected, the specifiedlimits for pres
sures, temperatures, electrical data, torques, etc. must not
be exceeded.
Please comply with national and local safety laws and regula
tions.
If you wish to implement an emergency stop function, please
observe the measures listed in section 1.6.3.
VII