Configure The Fixture; Navigate The User Interface - ETC High End Systems SolaWash 1000 User Manual

Configure the Fixture

You can configure SolaWash 1000 fixtures through the onboard user interface.

Navigate the User Interface

1.
Press the [MODE/ESC] button (
battery when the fixture has no power.)
2. Browse the menu by pressing the up, down, left, or right navigation buttons.
3.
Press the [Enter] button (
4. Modify the selection by pressing the up, down, left, or right navigation buttons according
to the selection.
5.
Press the [Enter] button (
6.
To exit the menu, press the [MODE/ESC] (
Note:
the user interface returns to the default display after 15 seconds.
16
) to select a menu item.
) to confirm a modified selection.
If you press the [Enter] button to confirm a selection and push no other buttons,
Mode
Esc.
Mode
) to access the main menu. (The display is powered by
Esc.
Mode
) button.
Esc.
SolaWash 1000 User Manual