Flashforge Creator Pro User Manual page 52

the inevitable problem. At that situation, we have to pause printing.
First, press OK button or Left button to back to the menus. Then you will see:
●Back to Monitor
select it and then press
●Cancel Print
●Pause
●Pause at ZPos
●Change Speed
●Change Temperature
●Change HBP Temp
●Set Cooling Fan
When it display ON, press OK button. Then it will display OFF. It means the
cooling fan starting working;
When it display OFF, press OK button. Then it will display ON. It means the
cooling fan stopping working.
●Set Lights Off
●Print Statistics
select it and then press
Creator Pro User Guide | www.FlashForge.com
OK ; the display will indicate:
Printer name
Printing progress
R Extruder
L Extruder
Platform
OK ; the display will indicate:
Print Time (Spent time for printing)
Time Left
Filament (Accumulated filament length for printing)
Auto-level inactive (build plate cannot move)
52
400-699-1063