Flashforge Creator Pro User Manual page 49

●Level Build Plate
Build plate leveling refers to Chapter 5
●Home Axes
Select it and then press OK. The dual-extruder will move backwards, and the build
plate will elevate up. It means Creator Pro is ready for printing.
●Bot Statistics
select it and then press
●Filament Odometer
select it and then press
●Profiles
select it and then press
ABS
PLA
Profile1
Profile2
Select any option and press OK; the display will indicate:
Restore (Back to Utilities)
Creator Pro User Guide | www.FlashForge.com
Sound
Acceleration
Extruder Count
OK ; the display will indicate:
Lifetime (Accumulated time for printing)
Last Print (Spent time for the last printing)
Filament (Accumulated filament length for printing)
Fil. Trip (Accumulated filament length for printing)
OK ; the display will indicate:
Life (Accumulated filament length for printing)
Trip (Accumulated filament length for printing)
Reset (Press OK to reset the Trip data)
OK ; the display will indicate:
49
400-699-1063