Flashforge Creator Pro User Manual page 20

To lock the filament guide tube with R-shape buckles and insert another end to the
filament intake. To avoid filament jams, always ensure that any filament spool you
mount on the Creator Pro feeds from the bottom of the spool toward the top. Filament
mounted on the right spool holder when viewed from the back should always unspool
clockwise and filament loaded onto the left spool holder should always unspool
counterclockwise.
Congratulations! You've finished the hardware assembly process.
4-6
Creator Pro User Guide | www.FlashForge.com 400-699-1063
20