Flashforge Creator Pro User Manual page 48

Chapter 8: About function
In this chapter, we will introduce the Creator Pro function to you. We will mainly
introduce Utilities function and other available functions in printing process, as Print
from SD and Preheat are introduced in prior chapters.
Turn on your Creator Pro
Turn on your Creator Pro; the display will indicate:
▶ Print from SD Refer to Chapter 7
Preheat Refer to Chapter 7
Utilities
Utilities
Using the directional arrow buttons in the right of the screen to select Utilities,
Press OK key on the keypad, then you will see:
●Monitor Mode
select it and then press
Printer name
Printing progress
R Extruder
L Extruder
Platform
●Filament loading Refer to Chapter 7
Refer to Chapter 7
●Preheat Setting
●General Settings
select it and then press
Creator Pro User Guide | www.FlashForge.com
OK ; the display will indicate:
OK ; the display will indicate:
Ditto Printing (The dual-extruder print one model simultaneously)
Override GcTemp (Reselect)
Pause with Heat (Whether continue heating when pause printing)
48
400-699-1063