Flashforge Creator Pro User Manual page 32

6.2.10 Supports
After loading the model, click [Edit]--[Supports] or click the Supports icon directly,
then you will enter the support edit mode (as shown in the picture below). Click
[Back] to exit when you finish editing.
6-11
①Support Options
Click the Support Options, an option box will appear, supports options include
"treelike"and "linear", when choose "treelike", click [OK], then it will generate
treelike structure; when choose "linear", click [OK], then it will generate linear
structure.
Treelike Supports: You can set up treelike specifications such as overhang thresh,
post diameter, base diameter and base height.
Linear Supports: You can set up linear specifications such as overhang thresh and
pillar size.
If it is a model with supports, when you choose one of the supports options, the
software will judge whether existing supports need to be deleted or not on the basis of
the type of existing support, and will pop up the corresponding prompt to let you
make the choice.
Creator Pro User Guide | www.FlashForge.com 400-699-1063
32