Flashforge Creator Pro User Manual page 43

Preview: If you check the
done.
Machine Type: FlashForge Creator Pro
Supports: If you print a model with supports, you should click the inverted triangle
and select [Enable].
Raft: You are suggested to select [Enable].
Resolution: You are suggested to select [Standard].
More Options: You are suggested to keep them default.
[OK]
Click to select the path to save the Gcode file. You can rename the file as you
like and save it as a x3g file, click
Next, we are going to print the model.
Before printing, users should
(1) properly install the dual extruder.
(2) properly install the filament guide tube
(3) properly mount the filament spool and feed the filament
To make the process of feeding or withdrawing the filament easy, please follow the
next few steps carefully:
After inserting the filament into the filament intake, do not push it further until the
Creator Pro User Guide | www.FlashForge.com
[Preview] box, you can preview your model after slicing is
[Save] to generate a Gcode file.
7-6
43
400-699-1063