Flashforge Creator Pro User Manual page 38

● Printing Window Type
● Check for Update after start up: It is used to preset if it is necessary to
activate the online automatic update function, if choose yes, every time when you
open software, it can online detect if it is the latest version, once a new version found,
it will reminds users to download and install the new version.
6.2.13 Edit Menus
①Undo
Allows users to undo the recent edits by the following two methods:
Method 1: Click [Edit]--[Undo].
Method 2: Press the shortcut key Ctrl+Z.
② Redo
Allows users to redo the most recent edit you have undone to your model file by the
following two methods
Method 1: Click [Edit]--[Redo]
Method 2: Press the shortcut key Ctrl+Y.
③Empty Undo-stack
To clean up the recorded operating steps so as to release the memory.
④ Select All
By the following two methods, you could select all models in the scene. (When
models are too small to be seen or out of viewing scope, please click
[Scale] buttons to adjust the model.)
Method 1: Click [Edit]--[Select
Method 2: Press the shortcut Ctrl+A.
⑤ Duplicate
Select the object and duplicate the object through the following two methods:
Method 1: Click
[Edit]--[Duplicate]
Method 2: Press the shortcut key
Creator Pro User Guide | www.FlashForge.com
All].
Ctrl+V
38
[Center] and
400-699-1063