Flashforge Creator Pro User Manual page 12

2.1.3 Terms
Build Plate
Build Tape
Build Volume
Leveling Knobs
Extruder
Nozzle
Cooling Fan
Filament Intake
Filament Guide Tube
Unclogging Pin Tool
Stamping Wrench
Creator Pro User Guide | www.FlashForge.com
The surface on which the Creator Pro builds an object.
The blue tape that covers Creator Pro's build plate so
that the object can adhere to the build plate well.
The three dimensional amount of space that an object
will use once it is completed. The largest build volume
of Creator Pro is 227*148*150
Knobs under the build platform that are used for
adjusting the distance between the nozzle and build
plate.
The device that draws the filament from the spool,
melts it and extrudes it through a nozzle onto the build
plate.
Also called "print head", which located at the bottom
of the extruder where heated filament is squeezed out.
To cool the outer assembly of the extruder and gear
motor
An opening located at the top of the extruder.
A plastic piece that guides the filament from the
filament box to the filament intake
A tool that used for cleaning and unclogging the
extruder
A tool that used for seizing the nozzle's metal cube
12
400-699-1063