Flashforge Creator Pro User Manual page 51

Disable steppers
Steppers is lock. It means the position of extruder or build plate cannot be
manually adjusted. Press OK button again to back to Enable steppers. It means the
position of extruder or build plate can be manually adjusted.
●Auto-Level Adj
●Auto-Level Variance
●Max Z Probe Hits
select it and then press
descending after printing job completed.
●Calibrate Nozzles
select it and then press
X Axis Line
Y Axis Line
Done
●Restore Settings
select it and then press
●Eeprom
The setting is not suggested modified by users. Improper operation may cause the
device shutting down.
●Version Information
select it and then press
printer.
●Exit Menu
Options during printing process: In the process of printing, we may encounter
Creator Pro User Guide | www.FlashForge.com
OK ; the display will indicate the distance build plate
OK ; the display will indicate:
OK ; the display will indicate:
Restore factory settings？
NO
YES
OK ; the display will indicate the basic information of the
51
400-699-1063