Unlocking A Bail Latch (Type 1) Sfp - Alcatel-Lucent 1643 AMS Installation Manual

Installation trouble shooting
Figure
Figure B-3 Unlocking a bail latch (type 1) SFP
Bail latch (type 2)
Proceed as follows to remove this type of SFP:
...................................................................................................................................................................................................
Put the fibers away from the transceiver.
1
...................................................................................................................................................................................................
Move the bail upwards (see figure below).
2
Result:
was moved a bit out of its latch.
...................................................................................................................................................................................................
Grep the SFP transceiver with your own fingers and pull it out.
3
Important! Don't pull the bail to get the transceiver out, as the bail might be
teared away from the SFP.
E
N D
...................................................................................................................................................................................................
...................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
There should be a small click, or it should be visible that the transceiver
O F S T E P S
Alcatel-Lucent - Proprietary
See notice on first page
Removing the SFP modules
B-15