Alcatel-Lucent 1643 AMS Installation Manual page 190

ITM-CIT installation and NE provisioning
Management state
The state of the association with the OMS is displayed. The possible states are
described in the table below.
Management state
Normal
Uploading
Resyncing
ReEvaluating
FaultStatus
Downloading
EMS connection state
Indicates wether an active connection (CMISE association) exist to the element
manager (OMS).
....................................................................................................................................................................................................................................
6-24
Description
Normal will be displayed whenever the automated management
operations have been completed. In other words, the OMS has
completed the MIB upload, MIB download, MIB
resynchronization, or reevaluation of fault status. The state can
also be Normal when the association between the
ITM-CIT/OMS and the NE has been lost.
The OMS is performing an MIB upload.
If the MIB of the NE and the MIB image on the OMS are out
of synchronization, then the OMS invokes a resynchronization.
The management state shows the progress of this operation. If
executed properly, it should display, in order: Normal,
Resyncing, Normal, ReEvaluatingFaultStatus, Normal.
After a resynchronization, the OMS initiates a reevaluate fault
status operation.
A MIB download has been started by the OMS. The
management state is set to Normal during the downloading
process. If the MIB download is in progress when a loss of
association occurs, then the management state will remain
Downloading.
Alcatel-Lucent - Proprietary
See notice on first page
Confirm/Update the MIB
365-312-802R7.2
Issue 4, June 2007