E1 Cables - Alcatel-Lucent 1643 AMS Installation Manual

System cabling
Inner conductor of Rx-coaxial
Inner conductor of Tx-coaxial
Cable connection
Please connect the E1 cables as shown in the figure below.
Figure 4-35 E1 cables
to DDF
NOTE: The routing of the E1 cables should be in accordance with the recommended
practices of the cables selected. The cables should be strain relieved to prevent any
force from being exerted on the connectors.
Orderable cables
The following cables can be ordered:
• 75 Ω, 10 m [32.808 ft] E1 cable — CC848771721
• 75 Ω, 50 m [164.042 ft] E1 cable — CC848771739
• 75 Ω, 100 m [328.084 ft] E1 cable — CC848771747.
....................................................................................................................................................................................................................................
4-34
Stranded wire AWG 26
GND
GND
Braid of Rx-coaxial
Braid of Tx-coaxial
TP2
Alcatel-Lucent - Proprietary
Tinned copper braid
See notice on first page
E1 interfaces (Main board/X16E1-V3 card)
365-312-802R7.2
Issue 4, June 2007