Ne Login Procedure - Alcatel-Lucent 1643 AMS Installation Manual

ITM-CIT installation and NE provisioning

NE login procedure

...................................................................................................................................................................................................................................
Overview
This section describes the login procedure to an NE.
Before you begin
Before starting the application, ITM-CIT, and login to an NE, make sure that
• the PC is connected to the NE (see section
(p.
• the PC is rebooted at least once after software installation.
Initial login procedure
Complete the following steps to login to an NE:
...................................................................................................................................................................................................
Start the ITM-CIT application.
1
Result:
...................................................................................................................................................................................................
Select
2
Result:
...................................................................................................................................................................................................
Select the correct
3
...................................................................................................................................................................................................
Select
4
1643 AM/AMS do operate on a baudrate of 115k.
...................................................................................................................................................................................................
Select
5
Result:
...................................................................................................................................................................................................
Select the user role from the capability field.
6
Selectable user roles are:
• Admin (for ITM-CIT administration and configuration of an NE)
• Config (to configure an NE)
• View (only to view NE configuration).
Fill in the required password (if configured) and click
...................................................................................................................................................................................................................................
6-12
6-10))
The main ITM-CIT window appears.
File → NE Login → Login
The NE Login window appears.
COM port.
Edit
to set the correct baudrate.
Login
.
The Password Required window appears.
Alcatel-Lucent - Proprietary
"Connecting the ITM-CIT to the NE"
in the main menu.
Usually, this is COM1.
See notice on first page
OK
.
365-312-802R7.2
Issue 4, June 2007