Alcatel-Lucent 1643 AMS Installation Manual page 151

System cabling
Figure 4-52 Dust plug
Specifications
The following optical SFPs are available:
• STM-1, S1.1 (CC109469809), short haul, 1300 nm, 15 km
• STM-1, L1.1 (CC109469825), long haul, 1300 nm, 40 km
• STM-1, L1.2 (CC109469817), long haul, 1500 nm, 80 km
• STM-1, 155E (CC109543561), electrical
• STM-1/STM-4, SWF 1-1, (CC109559500), 1480/1500 nm, single fiber bidirectional
• STM-1/STM-4, SWF 1-2, (CC109559492), 1490/1310 nm, single fiber
bidirectional.
• GE SX (CC109526483), 850 nm, multi-mode 550 m
• GE LX (CC109526491), 1310 nm, single-mode 5–10 km
• GE ZX (CC109534347), 1550 nm, single-mode 80 km.
The characteristics of the SFPs are summarized in the table below.
Table 4-19
Wavelength
Max. output power
Eye mask pattern
FDA class/IEC hazard
level
Maximum dispersion
Attenuation range
Optical path penalty
Sensitivity
Overload
....................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
Optical SFP specifications
S1.1
Transmitter
1270...1360 nm
–8...–15 dBm
see G.957
Class I/1
185 ps/nm
0...12 dB
< 1 dB
Receiver
–28 dBm min.
–8 dBm max.
Alcatel-Lucent - Proprietary
See notice on first page
Optical interfaces (AMS unit/X5IP card)
L1.1
1270...1360 nm
+0...–5 dBm
see G.957
Class I/1
246 ps/nm
10...28 dB
< 1 dB
–34 dBm min.
–10 dBm max.
L1.2
1530...1565 nm
+0...–5 dBm
see G.957
Class I/1
not applicable
10...28 dB
< 1 dB
–34 dBm min.
–10 dBm max.
4-53