Technical Specifications (Fsp12Ams) - Alcatel-Lucent 1643 AMS Installation Manual

General information
Table 2-2
Item
Power consumption
Weight
Dimensions (HxWxD)
1643 AM main board assembly
The 1643 AM AM main board assembly contains the following:
• One or two STM-1 or two STM-4 optical line interface pairs (transmit/receive).
The optical interfaces are of type SC connectors. The optical adaptors, FC and ST,
are also supplied with the equipment.
• The optical interfaces with a choice between STM-1 short haul (two variants
available) or long haul or STM-4 short haul or long haul.
• Sixteen 2048 kbit/s electrical tributary interfaces (E1) with RJ45 connectors,
suitable for symmetrical twisted pair cables with an impedance of 120 Ω or for
coaxial cables with an impedance of 75 Ω.
• An F-interface for the ITM-CIT with an RJ45 connector.
• A Q-LAN interface for the OMS with an RJ45 connector.
• A timing output for 2 MHz synchronization with an RJ45 connector, suitable for
symmetrical twisted pair cables with an impedance of 120 Ω or for coaxial cables
with an impedance of 75 Ω.
• DC dual power or AC single power connector
• Four Miscellaneous Discrete Input (MDI) ports
• Four Miscellaneous Discrete Output (MDO) ports
• Two LEDs (red and green) to indicate the status of the unit.
1643 AMS main board assembly
The 1643 AMS AMS main board assembly contains the following:
• None, one or two STM-1 optical/electrical line interface pairs (transmit/receive).
More information is given in section
• 1643 AMS E1 version (CC109445643):
Sixteen 2048 kbit/s electrical tributary interfaces (E1) with RJ45 connectors,
suitable for symmetrical twisted pair cables with an impedance of 120 Ω or for
coaxial cables with an impedance of 75 Ω.
• 1643 AMS DS1 version (CC109445650):
Sixteen 1544 kbit/s electrical tributary interfaces (DS1) with RJ45 connectors,
suitable for symmetrical twisted pair cables with an impedance of 100 Ω.
• An F-interface for the ITM-CIT with an RJ45 connector.
• A Q-LAN interface for the OMS with an RJ45 connector.
...................................................................................................................................................................................................................................
2-4
Technical specifications (FSP12AMS) (continued)
Alcatel-Lucent - Proprietary
See notice on first page
FSP12AMS
< 125 W
3.4 kg
45 mm x 445 mm x 235 mm
"Pluggable SFPs" (p.
Hardware description
2-5).
365-312-802R7.2
Issue 4, June 2007