Connection Operations; Connection/Record Status; Partition Mode - Optiview VR Enterprise User Manual

Connection operations

5.2.1
to connect to the DVR Server's camera video from
Press
and press
of the DVR Server's channel is more than that of the channels that you
selected in partition mode,
Stream for the current cameras, you can use
Server's video in sequence. Pressing button
and Right-Single-Click image can back to normal mode.

Connection/Record status

5.2.2
This icon indicates the current connection and their record status:
Gray: Not connected;
Navy blue: Connected with no recording;
Green: Connected with recording.
You can change the record status by pressing corresponding number
button or change status of all connections at the same time by pressing
button.

Partition mode

5.2.3
You can set the partition mode by pressing corresponding button on the
right of main interface. It has the following partition modes:
— 1partition mode;
— 6partition mode;
— 10partition mode;
DVR Server Manual ver.6.05/rel.120909
will disconnect all connections. If the amount
Select the Main Stream or Sub
button to display DVR
will switch full screen mode
79
— 4partition mode;
— 9partition mode;
— 16partition mode.