Optiview VR Enterprise User Manual page 13

Camera can only play back instantly in those windows): Select a window, and
then Single-Right-Click it to select ―Instant playback‖. Finally, choose a time
and the camera you want to playback, and then system will play back video
data in current window according to your selection.
The window that is playing back video data will indicate a yellow border
to be different from the live windows.
In the course of the instant playback, you can press the Space bar to
switch the play/pause status or direction key → and ← to play next and
previous frame.
If you want to stop the instant playback, you can Single-Right-Click the
play backing window, and select ―End playback‖.
3.
Alarm popup
Single-Right-Click video image area in main interface and select ―Start
alarm popup‖ after you
otherwise, it can't be selected. After that when there is a motion detection
alarm (set in PTZ & Linkage setup
triggered by sensor
in sequence. This function does not include IP cameras, even though an IP
camera can have alarms, their images will not pop up. When you want to end
set ―Alarm camera popup interval‖ in system
and
(set in Sensor setup), system will display alarm cameras
DVR Server Manual ver.6.05/rel.120909
Motion detection setup) or an alarm is
7
setup,