Optiview VR Enterprise User Manual page 20

Add IP camera device
(1)
Press
【Server Name】Set a name for the new IP camera device.
【IP Address】Input the address of the IP Camera, it is an IP address or
IP alias of an IP camera which is connected through DNS Server.
【Steam Type】Select the main stream or sub stream for the device.
【Connect Port】Port that the system will connect to the IP Camera.
【Login user ID/Login Pass】When the user want to visit IP Camera and
the server has used the function of rights management, login user ID and
password will be checked. If the user has no right to visit that camera, the
connection will be cut down automatically.
【If use DNS to get IP】Select whether use DNS to get IP or not, if the
server end is the dynamic IP address, users need use DNS to get the server's
IP.
【DNS Server IP】Set IP address of DNS server host.
【DNS Server Port】DNS server host's port, which is provide to connect
DNS software.
button to add an IP Camera device:
Figure2— 1
14
DVR Server Manual ver.6.05/rel.120909