Ptz Control - Optiview VR Enterprise User Manual

configuration the same way, you can select the channel number from drop-list, and press
button.
system is constantly buffering information and the PostRec time can be set to have the
VR record buffered information that happened before the event took place. The PreRe
button will continue the recording for the set length of time after the event is over.

PTZ control

3.4
Press
In this screen, you can define the PTZ protocol and set the Preset Position as well
as the plan to execute them automatically.
【Camera】Select the camera to be set from the drop- list.
【Baud rate】Set baud rate according to PTZ protocol from the drop- list.
【PTZ Protocol】Select the communication protocol for the PTZ camera from
drop-list.
【Copy to】After finishing any channel, if you want to set any other channels'
configuration the same way, you can select the channel number from drop-list, and press
button.
【PTZ Address】Set the address of the decoder, which must match the value of
dipswitch in the PTZ.
【Speed】Set the speed of the PTZ
button to set PTZ
56
DVR Server Manual ver.6.05/rel.120909
. The VR