Setting Up The Development Environment; Installing Cab Files - Casio IT-600 Series Quick Start Manual

6. Setting Up the Development Environment

6.1 Installing CAB Files

1. After installing the library files, the CAB files in Table 6.1 will be installed in the folder below.
C:\Program Files\CASIO\MBSYS\CAB
Table 6.1
Library
System Library
Laser Scanner Library
Bluetooth Library
Camera Library
Imager Library
JPEG library
FLINK library
Notes:
1. The library with "Yes" in "Preinstalled" column is preinstalled in the IT-600 and in the
Device Emulator. Thus, it is not necessary to install those libraries, unless the library has
been updated or changed.
2. The CAB file, en_Flink.ARMV4I.CAB, in the table does not operate for the IT-600. Use
the FlinkLib.dll installed by default in the terminal.
2. Download the CAB file in Table 6.2 from the following site.
http://www2.casio.co.jp/system_en/pa/PADealer/
(The site requires your user name and password. Enter your user name and password as issued by
CASIO.)
Table 6.2
USBClientIT600.110.CAB
3. Copy all the CAB files (except the en_Flink.ARMV4I.CAB) in Table 6.1 and Table 6.2 to any
folder in the IT-600 via ActiveSync.
4. Carry out each CAB file.
5. When the installation starts, the installation status will appear.
en_SystemLib.ARMV4I.CAB
en_OBReadLib.ARMV4I.CAB
en_BluetoothLib.ARMV4I.CAB
en_CameraLib.ARMV4I.CAB
en_ImagerLib.ARMV4I.CAB
enJPEG.ARMV4I.CAB
en_Flink.ARMV4I.CAB
CAB file
USB client supported by Windows Mobile Device Center
CAB file
Description
51
Preinstalled
Yes
Yes
Yes
Yes
Yes
Yes
Yes (note 2)