Visual Studio 2005 - Casio IT-600 Series Quick Start Manual

6.3 Visual Studio 2005

There is no actual SDK available for Visual Studio as such. However, the CASIO libraries have
been released for VB .NET and C#. See Chapter 9 for basic usage instructions. In this chapter, the
remote debugging procedure using the IT-600 for application development in VB .NET and C#
environments is explained.
1. Establish connection with the IT-600 via ActiveSync.
2. Open the application project for VB .NET or C# in Visual Studio 2005.
3. Click the button in square box drawn by red line (see Figure 6.2) to make sure that Visual Studio
2005 has recognized the connection established with the IT-600 via ActiveSync. If it does not,
start up ActiveSync again to establish connection.
Figure 6.2
4. Choose IT-600 Device (or DT-X11 Device) in the pull-down menu box in Figure 6.3.
Figure 6.3
5. If once the debugger has started, debugging for the application can be carried out while checking
each operation by the application running on the IT-600.
53