Activesync Connection Via Irda - Casio IT-600 Series Quick Start Manual

Hide thumbs Also See for IT-600 Series:
Table of Contents

Advertisement

5.2.3 ActiveSync Connection via IrDA

If the PC supports an IrDA interface, it is possible to connect the IT-600 to the PC via IrDA
interface using ActiveSync.
Follow the steps below:
1. Choose PC Connection in the Control Panel on the IT-600.
2. Set PC Connection to IrDA.
3. Set the COM port of ActiveSync on the PC to the IrDA port.
4. Place the IrDA port located on the left side of the IT-600 facing the IrDA port on the PC directly.
Communication can be established if the distance is in the range of zero to approximately 1 m.
In case of 4Mbps rate, the maximum distance is approximately 30 cm.
5. From Start menu, navigate to Programs → Communication → ActiveSync and then start
up ActiveSync.
39

Advertisement

Table of Contents
loading

Table of Contents