6. Setting Up the Development Environment
6.1 Installing CAB Files
1. After installing the library files, the CAB files in Table 6.1 are installed in the folder below.
C:\Program Files\CASIO\MBSYS\CAB
Table 6.1
System Library
Bluetooth Library
Printer Library
Imager Library
MCR Library
SOBR Library
JPEG library
FLINK library
Notes:
1.
2.
2. Copy all the CAB files in Table 6.1 to any folder in the IT-3100 via ActiveSync.
3. Carry out each CAB file.
4. When the installation starts, the installation status appears.
Library
en_SystemLib.ARMV4I.CAB
en_BluetoothLib.ARMV4I.CAB
en_PrinterLib.ARMV4I.CAB
en_ImagerLib.ARMV4I.CAB
en_MCReadLib.ARMV4I.CAB
en_SerialOBRLib.ARMV4I.CAB
en_JPEG.ARMV4I.CAB
en_Flink.ARMV4I.CAB
The library with "Yes" in "Preinstalled" column is preinstalled in the IT-3100 and in the
Device Emulator. Thus, it is not necessary to install it, unless it has been updated or
changed.
The CAB file, en_Flink.ARMV4I.CAB, in the table does not operate for the IT-3100.
Use the FlinkLib.dll installed by default in the terminal.
CAB file
45
Preinstalled
Yes
Yes
Yes
Yes
No
No
Yes
Yes (note 2)