Casio IT-600 Series Quick Start Manual page 66

Connection via ActiveSync
The ways to establish connection of the Device Emulator via ActiveSync are;
- Using Visual Studio 2008 or Visual Studio 2005
- Using Standalone Device Emulator 3.0 (if Visual Studio 2008 or Visual Studio 2005 is not
available.)
1. Start up the Device Emulator by referring to Chapter 7.2 "Starting Up the Device Emulator".
2. Start up Visual Studio 2008 or Visual Studio 2005, and then navigate Tools → Device
Emulator Manager.
3. If Visual Studio 2008 or Visual Studio 2005 is not available on hand, start up the Standalone
Device Emulator 3.0.
C:\Program Files\Microsoft Device Emulator\1.0\dvcemumanager.exe
4. Right-click IT-600 Emulator in Available Emulators list and then choose Cradle in the
popup menu. See Figure 7.15.
Figure 7.15
5. Make sure ActiveSync has started up and the
screen of IT-600 in Figure 7.16. The icon indicates that the connection via ActiveSync has been
established.
Figure 7.16
icon in the status bar appears. See the emulated
Figure 7.17
66