Debugging Application - Casio IT-600 Series Quick Start Manual

7.4.2

Debugging Application

Basic Debug Operation
The debug operation used for the Device Emulator in both Visual Studio 2005 and eMbedded
Visual C++ 4.0 is the same with ordinary debug operation.
Debugging with the Device Emulator
With the Device Emulator, it is possible to set a brake point in source code of application program
for step-by-step debug method.
In case of using Visual Studio 2008 or Visual Studio 2005
Navigate to Debug → Start Debugging to start up debugging.
Figure 7.20
Similar to ordinary debugging operation with actual IT-600 device used, the Device Emulator
allows break point setting (drawn by red circle in Figure 7.21) in the source code and step-by-step
debug method.
Figure 7.21
68