Direct Tcp/Ip Connection From Visual Studio - Casio IT-600 Series Quick Start Manual

5.7 Direct TCP/IP Connection from Visual Studio

If you have a network connection to the IT-600 for example via WLAN or the Ethernet cradle, then
you can establish a direct link to the development PC without using ActiveSync.
For Visual Studio .NET 2003
You require the WindowsCE Utilities add-on pack (described in Chapter 2.3). Refer to the readme
file supplied with the add-on pack for details on how to set up the connection.
For Visual Studio 2005
1. Download the files listed below to the IT-600.
- Clientshutdown.exe
- ConmanClient2.exe
- CMAccept.exe
- DeviceDMA.dll
- eDbgTL.dll
- TcpConnectionA.dll
The source folder in the PC:
C:\Program Files\Common Files\Microsoft Shared\CoreCon\1.0\Target\wce400\armv4i
The destination folder in the IT-600:
\Windows
2. Run ConmanClient2.exe on the IT-600.
3. Set the device IP address in Visual Studio 2005.
4. Navigate to Tools in the main menu of Visual Studio 2005 → Options... → Device Tools →
Devices.
5. Choose IT-600 Device in the pull-down menu of Devices: and click Properties....
6. Click Transport: to access Configure... and set up Device IP address as shown in Figure
5.29.
Figure 5.29
7. Run CMAccept.exe on the IT-600.
8. Navigate to Tools in the main menu of Visual Studio 2005 → Connect to Device....
47