5.3 USB Connection via Windows Mobile Device Center
To establish connection via USB interface with PC runs in Windows Vista, use Windows Mobile
Device Center ("WMDC"). The IT-600 with the factory-setting (default) does not support the
WMDC. Follow the procedure below to change the setting.
Note that the CAB file, USBClientIT600.110.CAB, must be installed in the IT-600 prior to
establishing connection with the IT-600 via Windows Mobile Device Center. For installation
method, refer to Chapter 6.1 "Installing CAB Files".
Procedure
1. Close all applications running on the IT-600.
2. Navigate to Settings → Control Panel → USB Connection.
3. Click Connect Utility tab.
Figure 5.20
4. Choose Windows Mobile Device Center radio button and then click OK button.
Figure 5.21
5. A dialogue asking your final confirmation appears. Click YES button.
Figure 5.22
40