Casio IT-600 Series Quick Start Manual page 69

In case of using eMbedded Visual C++ 4.0
1. Establish connection between the Device Emulator and PC via ActiveSync before starting
debugging in eMbedded Visual C++ 4.0. For establishing connection via ActiveSync, refer to
Chapter 7.3.3 "Connecting via ActiveSync".
2. Navigate to Build in the menu bar → Start Debug → Go to start up debugging.
Figure 7.22
3. Similar to ordinary debugging operation with actual IT-600 device used, the Device Emulator
allows break point setting (drawn by red circle in Figure 7.23) in the source code and step-by-step
debug method.
Figure 7.23
69