Setting Up The Development Environment; Installing Cab Files - Casio IT-800 Series Quick Start Manual

6. Setting Up the Development Environment

6.1 Installing CAB Files

1. After installing the library files, the CAB files in Table 6.1 will be installed in the folder
below.
Table 6.1
System Library
Laser Scanner Library
Camera Library
Imager Library
WANGPRS Library
JPEG Library
FLINK Library
NFC Library
Notes:
1. The library with "Yes" in "Preinstalled" column is preinstalled in the IT-800 and in the
Device Emulator. Thus, it is not necessary to install it, unless it has been updated or
changed.
2. The CAB file, en_FlinkWM.ARMV4I.CAB, in the table does not operate for the IT-800.
Use the FlinkLib.dll installed by default in the terminal.
2. Copy all the CAB files in Table 6.1 to any folder on the IT-800 via ActiveSync.
3. Carry out each CAB file.
4. When the installation starts, the installation status will appear.
C:\Program Files\CASIO\MBSYS\CAB
Library
en_SystemLibWM.ARMV4I.CAB
en_OBReadLibWM.ARMV4I.CAB
en_CameraLibWM.ARMV4I.CAB
en_ImagerLibWM.ARMV4I.CAB
en_WANGPRSLibWM.ARMV4I.CAB
enJPEGWM.ARMV4I.CAB
en_FlinkWM.ARMV4I.CAB
en_NFCLibWM.ARMV4I.CAB
CAB file
36
Preinstalled
Yes
Yes
Yes
Yes
No
Yes
Yes (note 2)
Yes