Setting Up The Development Environment; Installing Cab Files - Casio DT-X7 Series Quick Start Manual

6. Setting Up the Development Environment

6.1 Installing CAB Files

1. After installing the library files, the CAB files in Table 6.1 will be installed in the folder below.
C:\Program Files\CASIO\MBSYS\CAB
Table 6.1
System Library
Laser Scanner Library
Imager Library
Bluetooth Library
JPEG library
FLINK library
Notes:
1. The library with "Yes" in "Preinstalled" column is preinstalled in the DT-X7 and in the Device
Emulator. Thus, it is not necessary to install it, unless it has been updated or changed.
2. The CAB file, en_Flink.ARMV4I.CAB, in the table does not operate for the DT-X7. Use the
FlinkLib.dll installed by default in the terminal.
Download the CAB file in
2. Table 6.2 from the following site.
http://www2.casio.co.jp/system_en/pa/PADealer/
(The site requires your user name and password. Enter your user name and password as issued by
CASIO.)
Table 6.2
USBClientDTX7.110.CAB
Copy all the CAB files in Table 6.1 and
3. Table 6.2 to any folder on the DT-X7 via ActiveSync.
4. Carry out each CAB file.
5. When the installation starts, the installation status will appear.
Library
en_SystemLib.ARMV4I.CAB
en_OBReadLib.ARMV4I.CAB
en_ImagerLib.ARMV4I.CAB
en_BluetoothLib.ARMV4I.CAB
en_JPEG.ARMV4I.CAB
en_Flink.ARMV4I.CAB
CAB file
USB client supported by Windows Mobile Device Center
CAB file
Description
52
Preinstalled
Yes
Yes
Yes
Yes
Yes
Yes (note 2)