Danfoss VLT FC 101 Quick Manual page 33

Programming
Parameter
Parameter 0-03 Regional
Settings
Parameter 0-06 GridType
Parameter 1-00 Configuration
Mode
MG18A802
Quick Guide
Range Default
[0] International [0] International
[1] US
[0]–[132] see Table 4.4. Size selected
[0] Open loop [0] Open loop
[3] Closed loop
Danfoss A/S © 05/2016 All rights reserved.
Usage
–
Select the operating mode for restart after reconnection of
the frequency converter to mains voltage after power-
down.
Select [3] Closed loop.
4 4
31