Danfoss VLT FC 101 Quick Manual page 15

Installation
Complete the following steps to connect the mains cables
for enclosure size H9. Use the tightening torques described
in chapter 3.2.1 Electrical Installation in General.
1. Slide the mounting plate into place and tighten
the 2 screws as shown in Illustration 3.8.
Illustration 3.8 Mounting the Mounting Plate
MG18A802
Quick Guide
2.
Illustration 3.9 Mounting the Ground Cable
3.
Illustration 3.10 Mounting the Mains Plug
Danfoss A/S © 05/2016 All rights reserved.
Mount the ground cable as shown in
Illustration 3.9.
Insert the mains cables to the mains plug and
tighten the screws as shown in Illustration 3.10.
3 3
13