Operating The Memospeed Menu (Optional) - KaVo Primus 1058 Life TM Instructions For Use Manual

Hide thumbs Also See for KaVo Primus 1058 Life TM:
Table of Contents

Advertisement

4.7.3 Operating the MEMOspeed menu (optional)

The MEMOspeed menu is used to display and set handpiece-specific values.
The display depends on which instrument was withdrawn.
To save the handpiece-specific values, there are 3 memory levels (1, 2, 3) each
available for two dentists (dentist 1 and dentist 2).
Save instrument-specific settings
The following settings can be individually:saved for the instruments:
Handpiece
Turbine
Motor INTRA LUX KL
701/703,
COMFORTdrive
Ultrasonic scaler
Multifunctional handpiece Heating on/off
* only with a corresponding setting in service mode
Changing turbine settings in the menu
Note
Following instructions for use, service instructions and installation instructions
in the instrument packaging.
Note
The speed can be set at level E only with the foot pedal.
The speed cannot be saved in level E.
▶ Remove the turbine from the holder.
▶ Briefly press the "Preselect level" (S1) key to select the level.
▶ Press the "Preselect level" (S1) key for 4 seconds to change settings.
ð
The display switches to the turbine settings menu.
Settings menu for minimal/maximal speed
▶ Press the "min/max" (S4) keyed to toggle between the settings menus for
minimal and maximal speed.
▶ Press the "Decrease value" key to decrease the speed.
or
4 Operation | 4.7 Using functions through the menu
Setting
Speed range (available with level switching only)
Preselected spray
Speed range (available with level switching only)
Direction of motor rotation
Preselected spray
Spray on/off*
Intensity (with level switching only)
69 / 126
Instructions for use Primus 1058 Life

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kavo primus 1058 life c

Table of Contents